هیدرولیک و پنوماتیک (دوپلماتیک)
برای دسترسی به کاتالوگ محصولات بر روی نام محصول یا تصویر محصول کلیک کنید
Double acting cylinders according to ISO 6022 and DIN 24333. Fourteen mounting styles are available, as well as a vast range of accessories to meet all application requirements. Versions rated for ATEX II 2GD and ATEX II 3GD are available.
Tie-rods cylinders according to ISO 6020-2 and DIN 24554. Fourteen mounting styles available, as well as a vast range of accessories to meet all application requirements. Versions rated for ATEX II 2GD and ATEX II 3GD are available.
The DSE2 is a proportional directional valve, direct operated, for subplate mounting. It is used to control the position and speed of the hydraulic actuators. Spools with open or closed center are available for several nominal flow rates. It can be controlled directly by a current-controlled power supply, or by an electronic card, to be order separately.
The DSE3B is a proportional directional valve, direct operated, for subplate mounting. It is used to control the position and speed of the hydraulic actuators. Spools with open or closed center are available for several nominal flow rates. DSE3B valves range also includes versions with high IP degree and corrosion resistance. It can be controlled directly by a current-controlled power supply, or by an electronic card, to be order separately.
DSE3G, DSE3GL and DSE3GH are proportional directional valves, direct operated, with on-board electronics, for subplate mounting. They are used to control the position and speed of the hydraulic actuators. The valves are available with different types of on-board electronics for open loop: The G version is our standard electronics with analogue interface with current or voltage reference signal with connection 6 pin + PE. The GL version comes with compact box with Io-Link, Can-Open or analog interface and 5 pin M12 connection. The GH version has interface for fieldbus communication type EtherCAT, Ethernet/IP, Profinet, PowerLink, with 11 pin M12 connection.
The DSE3K*, DSPE5K*, DSPE5RK*, DSPE7K*, DSPE8K* and DSPE10K* are explosion-proof proportional directional valves, for subplate mounting. They are compliant with ATEX, IECEx, INMETRO or PESO requirements and are suitable for use in potentially explosive atmospheres, for surface plants or mines. A low temperature version (up to – 40 °C) is also available. They are used to control the position and speed of the hydraulic actuators. Spools with open center, closed center and for regenerative circuits are available. Pilot supply can be internal, internal with built-in pressure reducing valve, or external. Internal or external drainage. The valves are available with 12 or 24 V solenoid. Several connection types are available, metric or NPT type. Cable glands are available. They can be controlled directly by a current-controlled power supply, or by an electronic card, to be order separately.
The DSE3 is a proportional directional valve, direct operated, for subplate mounting. It is used to control the position and speed of the hydraulic actuators. Spools with open or closed center are available for several nominal flow rates. DSE3 valves range also includes versions for high IP degree and corrosion resistance. It can be controlled directly by a current-controlled power supply, or by an electronic card, to be order separately.
DSE3J, DSE3JL and DSE3JH are proportional directional valves, direct operated, with on-board electronics and position feedback, for subplate mounting. They are used to control the position and speed of the hydraulic actuators. The valves are available with different types of on-board electronics: The J version is our standard electronics with analogue interface with current or voltage reference signal with connection 6 pin + PE. The JL version comes with compact box with Io-Link, Can-Open or analog interface and 5 pin M12 connection. The JH version has interface for fieldbus communication type EtherCAT, Ethernet/IP, Profinet or PowerLink with 11 pin M12 connection.