Pressure gauges
Digital pressure gauges
Pressure sensors
Process transmitter
Pressure gauges with output signal
Pressure switches
Contact pressure gauge
Diaphragm seals
Diaphragm seal systems
Valves and protective devices
Mounting accessories
Electrical accessories
Engineered solutions pressure
Pressure gauges
Pressure gauges from WIKA – market leader worldwide since 1946
Our pressure gauges (mechanical pressure measuring instruments) for gauge, absolute and differential pressure have been proven millions of times over. For the optimal solution for the widest range of applications, there is a choice of measuring systems in Bourdon tube, diaphragm element and capsule element technologies. The pressure gauges cover scale ranges from 0 … 0.5 mbar to 0 … 6,000 bar and indication accuracies of up to 0.1 %. For the various requirements in industrial and process instrumentation there are pressure elements from copper alloys, stainless steel or special materials available.
Models 111.10, 111.12
The model 111 pressure gauges are based on the proven Bourdon tube measuring system. The deflection of the Bourdon tube is transmitted to a movement and indicated.
Applications
For gaseous and liquid media that are not highly viscous or crystallising and will not attack copper alloy parts
Pneumatics
Heating and air-conditioning technology
Medical engineering
Special Features
Reliable and cost-effective
Design per EN 837-1 or ASME B40.100
Nominal size 40 [1 ½”], 50 [2″], 63 [2 ½”], 80 [3″], 100 [4″] and 160 [6″]
Scale ranges to 0 … 400 bar [0 … 6,000 psi]
Models 232.30, 233.30
This high-quality Bourdon tube pressure gauge has been designed especially for increased safety requirements within the process industry.
Applications
Increased safety requirements for personal protection
For gaseous and liquid aggressive media that are not highly viscous or crystallising, also in aggressive environments
Oil and gas industry, chemical and petrochemical industries, power engineering and also water and wastewater technology
Special Features
Safety version with solid baffle wall (Solidfront) designed in compliance with the requirements of EN 837-1 and ASME B40.100
Excellent load-cycle stability and shock resistance
With case filling (model 233.30) for applications with high dynamic pressure loads and vibrations
EMICOgauge version, to avoid fugitive emissions
Scale ranges from 0 … 0.6 to 0 … 1,600 bar [0 … 10 to 0 … 20,000 psi]
Digital pressure gauge
High-quality digital pressure gauges from WIKA
A digital pressure gauge displays the acting pressure in an integrated digital display. WIKA offers digital pressure gauges for general industrial applications and also for use in the field of testing and calibration. The indicator cases of our digital pressure gauges are rotatable if required and thus always ensure a good readability. In addition, intrinsically safe versions and instruments with wireless interface are available.
Model CPG1500
concept of an analogue gauge, and raises it to a level only matched by digital calibrators. The accuracy of digital measurement technology and the simplicity of an analogue gauge are combined together to create the digital pressure gauge CPG1500, which in terms of performance, ease-of-use, and instrument features, is unmatched in the pressure measurement market.
Applications
Oil and gas industry
Maintenance and service facilities
Calibration service companies and service industry
Simple calibrations directly on site
Pressure test
Special features
Measuring ranges up to 0 … 10,000 bar (0 … 150,000 psi), vacuum and absolute pressure ranges also available
Accuracy: up to 0.025 % (incl. calibration certificate)
Intrinsically safe version
Logger function with up to 50 measured values per second
Communication with WIKA-Cal software over WIKA-Wireless
Model CPG1200
The battery-operated and very sturdily built digital pressure gauge model CPG1200 has been designed specifically for use in mobile applications. Ranges up to -1 … 1,000 bar [-14.5 … 15,000 psi] (gauge pressure) feature an accuracy down to 0.25 % FS.
Applications
Hydrostatic pressure test
Burst tests
Leakage measurement
Setting of switch points on pressure switches
Analysis of process pressures
Special features
Setting and checking operating pressures is easier than ever
Simple data transmission – via USB and Bluetooth®
For mobile use and stationary continuous operation
Pressure sensors
For each measuring task the right pressure sensor
A pressure sensor (or pressure transmitter) converts the physical quantity ‘pressure’ into an industry-standard signal. In addition to a wide range of pressure sensors for general industrial applications, we offer special versions for refrigeration/air conditioning technology, the food industry, mobile working machines, medical gases and also the semiconductor industry. Our pressure sensor portfolio covers accuracies from 0.05 %, measuring ranges from 0.05 bar up to 15,000 bar, digital interfaces such as CANopen and IO-Link and also various international approvals, including for hazardous areas.
Model A-10
The model A-10 pressure transmitter for general industrial applications is not only notable for its compact design, but it also offers excellent quality at an extremely competitive price. The user can choose between a non-linearity of 0.25 % and 0.5 %. A free test certificate provides information on the measuring points recorded during manufacture.
Applications
Machine building
Ship building
Measurement and control technology
Hydraulics and pneumatics
Pumps and compressors
Special Features
Measuring ranges from 0 … 0.05 to 0 … 1,000 bar [0 … 1 to 0 … 15,000 psi]
Non-linearity 0.25 % or 0.5 %
Output 4 … 20 mA, DC 0 … 10 V, DC 0 … 5 V and others
Electrical connection: Angular connector form A and C, circular connector M12 x 1, cable outlet 2 m [6 ft]
Process connection G ¼ A DIN EN ISO 1179-2, ¼ NPT and others
Model S-20
The model S-20 pressure transmitter for general industrial applications is the ideal solution for customers with demanding measuring requirements. It features a very good accuracy, a robust design and an exceptional number of variants, meaning it can be suited to the widest range of applications.
Applications
Critical industrial applications
Demanding applications in research and development
Harsh environments in the process industry
Special Features
Measuring ranges from 0 … 0.4 to 0 … 1,600 bar
Non-linearity up to 0.125 % of span
Different output signals, e.g. 4 … 20 mA, DC 0 … 10 V, DC 1 … 5 V and others
Market-standard electrical connections, e.g. DIN 175301-803 A angular connector
Common international process connections
Process transmitters
High measurement accuracy with process transmitters from WIKA
Process transmitters differentiate themselves from pressure sensors through their increased range of functionality: They feature integrated displays, offer high measurement accuracies and freely scalable measuring ranges, communicate via digital bus signals and can be delivered with a multitude of case variants. Through connection to diaphragm seals, WIKA process transmitters are also suitable for the harshest operating conditions.
Orifice plates for flow FPD150
Flow measurement plates to fit between RF, FF or RTJ flanges
Available as Concentric (square edged, conical entrance and quarter circle profile) or Eccentric (eccentric and segmental profile) designs to measure the flow of clean or contaminated liquids, gases or steam.
Applications
Control and process technology
Machine building and plant construction
Pharmaceutical and hygienic industries
Food industry
Chemical, petrochemical industry
Special features
Multi-functional display
Simple menu navigation
Conductive plastic case or stainless steel case (optionally with electropolished surface)
Large LC display, rotatable
Approvals for hazardous areas
Models IPT-20, IPT-21
With its 4 … 20 mA, 4 … 20 mA HART®, PROFIBUS® PA or FOUNDATION Fieldbus™ output signals, combined with either intrinsic safety or flameproof enclosure ignition protection type (in accordance with ATEX and IECEx), the model IPT-2x is ideally suited to applications with the highest demands on the measurement technology.
Applications
Chemical and petrochemical industries
Process engineering
Pharmaceutical industry
Food and beverage industry
Hazardous areas
Special features
Ex protection per ATEX and IECEx
For applications to SIL 2 (SIL 3)
Welded metal measuring cell
Seven different case variants
Configuration via EDD and DTM (Device Type Manager) in accordance with the FDT (Field Device Tool) concept, e.g. PACTware
Pressure gauges with output signal
For all established electrical signals with non-contact sensor
Pressure gauges with output signal combine the advantages of the analogue indication of a mechanical pressure gauge, needing no external power, with the electrical output signal of a pressure transmitter. These hybrid instruments are available with all commonly used electrical signals. The sensor works in a non-contact way, without any influence on the measuring signal. Many of the instruments can be delivered in accordance with ATEX with an Ex i intrinsically safe ignition protection type.
Models PGT23.100, PGT23.160
Wherever the process pressure has to be indicated locally and, at the same time, a signal transmission to the central control or remote centre is desired, the model PGT23 intelliGAUGE® (patent, property right: e.g. DE 202007019025) can be used.
Applications
Acquisition and display of processes
Output signal 4 … 20 mA for the transmission of process values to the control room
Easy-to-read, analogue on-site display needing no external power
Process industry: Chemical industry, petrochemical industry, oil and gas, power generation, water and wastewater
Special Features
No configuration necessary due to “plug-and-play”
Signal transmission per NAMUR
Measuring ranges 0 … 0.6 bar to 0 … 1,600 bar
Easy-to-read analogue display with nominal size 100 or 160
Safety version S3 per EN 837
Models PGU23.100, PGU26.100
The model PGU2x.100 pressure gauge in combination with the model NETRIS®3 radio unit is used wherever web-based remote monitoring of the process pressure is desired in addition to on-site indication.
Applications
Remote monitoring of the process pressure for non-critical applications in combination with WIKA radio unit, model NETRIS®3
Process industry: Oil and gas, chemical and petrochemical industries, water and wastewater, power generation
For gaseous and liquid aggressive media that are not highly viscous or crystallising
Increased safety requirements for personal protection
Special features
IIoT-capable measuring instrument in combination with WIKA radio unit, model NETRIS®3
Mechanical on-site indication with integrated digital interface
Intrinsically safe version Ex i per ATEX, IECEx
Measuring ranges from 0 … 0.6 to 0 … 1,600 bar [0 … 10 to 0 … 20,000 psi] as well as vacuum and +/- measuring ranges
Pressure switch
For each application the right pressure switch
A pressure switch opens or closes a corresponding switch contact as soon as a preset pressure is reached. Depending on the requirement and the design, pressure switches are used with mechanical or electronic switch contacts, with or without displays and with various setting possibilities. Pressure switches are used in a variety of industrial and technical processes – in WIKA’s wide selection you will find the right version for each application.
Model PSD-4
The PSD-4 electronic pressure switch is the universal solution for industrial automation tasks – also in hygienic applications and under harsh conditions. Due to an accuracy of < ±0.5 % and minimal long-term drift, it permanently ensures an accurate representation of the process pressure for more than 100 million load cycles. The pressure switch is available with a digital output signal as well as a switchable and scalable analogue output. In addition, it can also be easily monitored via the self-diagnostics.
Applications
Machine tools
Hydraulics and pneumatics
Special machine building
Food and pharmaceutical industry
Special features
Advanced condition monitoring via IO-Link
Higher flexibility, lower inventory
Easy integration combined with good readability
Fast parameterisation via 3-buttons
Model PCA
The pressure switches have been developed especially for safety-critical applications with limited space.
The high quality of the products and manufacturing in accordance with ISO 9001 ensure reliable monitoring of your plant. In production, the switches are traced by quality assurance software at every step and subsequently are 100 % tested.
Applications
Pressure monitoring and control of processes
Safety-critical applications in general process instrumentation, especially in the chemical and petrochemical industries, oil and gas industries, power generation incl. nuclear power plants, water/wastewater industries, mining
For gaseous and liquid, aggressive, highly viscous or contaminated media, also in aggressive ambience
For measuring points with limited space, e.g. control panels
Special Features
No power supply needed for switching of electrical loads
Robust switch enclosure from aluminium alloy or stainless steel with identical dimensions, IP66, NEMA 4X
Setting ranges from 0.2 … 1.2 to 200 … 1,000 bar, vacuum ranges
Repeatability of the set point ≤ 1% of span
1 set point, SPDT or DPDT, high switching power up to AC 250 V, 15 A
Contact pressure gauges
Contact pressure gauges: Switching and indicating with a single instrument
Wherever the process pressure has to be indicated locally and, at the same time, limit values must be monitored, contact pressure gauges find their application. The switch contacts make or break circuits dependent upon the pointer position of the indicating measuring instrument. If the reading is significantly above or below a set value, they trigger an alarm, hence also the term “alarm contact”. Contact pressure gauges are also suitable for starting, stopping or switching processes.
Models PGS23.100, PGS23.160
Wherever the process pressure has to be indicated locally and, at the same time, circuits need to be switched, the model PGS23.1×0 switchGAUGE finds its use. Switch contacts (electrical switch contacts) make or break an electric control circuit dependent upon the pointer position of the indicating measuring instrument. The switch contacts are adjustable over the full extent of the scale range (see DIN 16085), and are mounted predominantly below the dial, though also partly on top of the dial. The instrument pointer (actual value pointer) moves freely across the entire scale range, independent of the setting.
The set pointer can be adjusted using a removable adjustment key in the window.
Applications
Control and regulation of processes
Monitoring of plants and switching of circuits
For gaseous and liquid aggressive media that are not highly viscous or crystallising, also in aggressive environments
Chemical industry, petrochemical industry, power plants, mining, on-/offshore, environmental technology, machine building and general plant construction
Special Features
Up to 4 switch contacts per instrument
Also available with case filling for high dynamic pressure loads or vibrations
Instruments with inductive contacts for use in hazardous areas
Instruments with contacts for PLC applications
Instruments optionally available in safety version S3 per EN 837
Models PGS43.100, PGS43.160
Wherever the process pressure has to be indicated locally, and, at the same time, circuits are to be made or broken, the model PGS43.1×0 switchGAUGE can be used. Switch contacts (electrical alarm contacts) make or break an electric control circuit dependent upon the position of the instrument pointer. The switch contacts are adjustable over the full extent of the scale range (see DIN 16085), and are mounted predominantly below the dial, though also partly on top of the dial. The instrument pointer (actual value pointer) moves freely across the entire scale range, independent of the setting.
The set pointer can be adjusted using a removable adjustment key in the window.
Applications
Control and regulation of industrial processes at measuring points with increased overpressure and scale ranges from 0 … 25 mbar
Monitoring of plants and switching of electric circuits
For gaseous and liquid, aggressive and highly viscous or contaminated media, also in aggressive ambience
Process industry: Chemical, petrochemical, power plants, mining, on- and offshore, environmental technology, machine building and general plant construction
Special Features
High reliability and long service life
Wide choice of special materials
Up to 4 switch contacts per instrument
Also available with liquid filling for high dynamic pressure loads or vibrations
Instruments with inductive contacts for use in hazardous areas
Instruments with contacts for PLC applications
Diaphragm seals
The optimal diaphragm seal for every process
WIKA diaphragm seals (often also referred to as chemical seals), mounted with pressure gauges, process transmitters, pressure switches etc., are recognised and valued internationally for the most difficult of measuring tasks. By using diaphragm seals, the measuring instruments can be used at extreme temperatures from -90 to +400 °C and with aggressive, corrosive, heterogeneous, abrasive, highly viscous or toxic media. The optimal diaphragm seal designs, materials and filling media are available for each application.
Model 990.10
Diaphragm seals are used for the protection of pressure measuring instruments in applications with difficult media. In diaphragm seal systems, the diaphragm of the diaphragm seal effects the separation of the instrument and the medium.
Applications
For aggressive, hot, corrosive, environmentally hazardous or toxic media
Process industry
Special Features
Process connection with thread
Version with internal diaphragm, diaphragm seal parts screwed together
Large selection of process connections and materials
Flushing connections optionally available
Model 990.34
Diaphragm seals are used for the protection of pressure measuring instruments in applications with difficult media. In diaphragm seal systems, the diaphragm of the diaphragm seal effects the separation of the instrument and the medium.
The pressure is transmitted to the measuring instrument via the pressure transmission medium which is inside the diaphragm seal system.
Applications
Aggressive, hot, corrosive, environmentally hazardous or toxic media
Oil and gas industry, chemical and petrochemical industries
Water treatment
Versatile in application
Special Features
Process connection with thread
Version with internal diaphragm, diaphragm seal parts fully welded
Large selection of process connections and materials
Flushing connections optionally available
High pressures up to 1,000 bar [14,500 psi] can be achieved
Diaphragm seal systems
The optimal diaphragm seal for every process
In our section “Diaphragm seal systems” you will find a selection of the common combinations of diaphragm seals with pressure measuring instruments. All the diaphragm seal systems presented here feature fast availability and are particularly suitable for demanding measuring tasks in the pharmaceutical and biotechnology industries, food and beverage industries etc.. The complete WIKA diaphragm seal portfolio can be found in the “Diaphragm seals” section.
Model DMSU21SA
The model DMSU21SA diaphragm monitoring system fulfils the constantly growing requirements for process monitoring on plants for sanitary applications. With the HART® protocol, not only the measuring signal, but also the status of the integrated diaphragm monitoring can be transmitted, as required, to the process control. The system architecture with integrated diaphragm monitoring bridges the gap between digitalisation and process reliability.
Applications
Hygienic pressure measurement for the pharmaceutical industry and for aseptic food processing
Pressure/vacuum measurement on pipelines, fermenters, bioreactors and vessels as well as with processing and transport of high-quality media
Suitable for the production of active pharmaceutical ingredients (API)
For the monitoring of processes with sterile steam
For gases, vapour; liquid, pasty, powdery and crystallising media
Special features
Double-diaphragm system prevents contamination of process and environment
Hygienic process connections in different designs
Signal transmission and configuration with only one cable per measuring location
Minimal installation costs, even with retrofitting
Model DMS-FP
The WIKA combinations consisting of diaphragm seal, pressure measuring instrument and monitoring element are best suited for the harshest and hygienic measuring tasks. The systems can withstand the cleaning vapour temperatures occurring in SIP processes and ensure a sterile connection between the medium to be measured and the diaphragm seal.
Applications
Hygienic pressure measurement for the pharmaceutical industry and for aseptic food processing
Pressure/vacuum measurement on pipelines, fermenters, bioreactors and vessels as well as with processing and transport of high-quality media
Suitable for the production of active pharmaceutical ingredients (API)
For gases, vapour; liquid, pasty, powdery and crystallising media
Special features
Double-diaphragm system to ensure the separation of the process and the pressure measuring instrument
Clamp connection easy to open for cleaning and seal replacement
Suitable for SIP and CIP
Valves and protective devices
Valves and protective devices for increased safety and service life
Via cocks, shut-off valves, valve manifolds or monoflanges, pressure measuring instruments can be securely separated from the process during commissioning, maintenance or calibration. Protective devices, such as syphons, overload protection and snubbers, increase the service life and extend the application spectrum of pressure measuring instruments. In addition to the extensive selection of instrumentation valves and accessories, WIKA also offers the qualified assembly of various individual parts to form a complete measuring assembly (“instrument hook-up”).
Models IV10, IV11
Needle valves and multiport valves separate the process from measuring instruments such as pressure gauges, switches or transmitters. By closing this valve the instrument can be safely dismounted for services like recalibration or replacement. With the vent connection option, the instrument can be vented to the atmosphere by means of the needle valve. Already in the standard version, the multiport valve is equipped with two additional connections. These can be used either as vent connections or for the connection of additional instruments.
Applications of the needle valve
Shut off and vent pressure measuring instruments
For gaseous and liquid aggressive media that are not highly viscous or crystallising, also in aggressive environments
Process industry: Oil & gas, petrochemical, chemical industries, power generation, water and wastewater
Special features of the needle valve
Low-wear design due to non-rotating spindle tip in the bonnet
Low torque and smooth operation of valve handle even at high pressure
Enhanced safety due to blow-out proof bonnet design
Valve seat tested for leak tightness per BS6755 / ISO 5208 leak rate A
Customer-specific combination of valves and instruments (hook-up) on request
Models IV20, IV21
With 2-valve manifolds, the block-and-bleed version is standard. The shut-off valve of the separates the process from measuring instruments such as pressure gauges, switches or transmitters. By closing this valve the instrument can be safely dismounted for services like recalibration or replacement. The vent valve allows the safe venting of the instrument, prior to the dismounting or for zero point check.
Applications of the block-and-bleed valve
Shut off and vent pressure measuring instruments
For gaseous and liquid aggressive media that are not highly viscous or crystallising, also in aggressive environments
Process industry: Oil & gas, petrochemical, chemical industries, power generation, water and wastewater
Special features of the block-and-bleed valve
Low-wear design due to non-rotating spindle tip in the bonnet
Low torque and smooth operation of valve handle even at high pressure
Enhanced safety due to blow-out proof bonnet design
Valve seat tested for leak tightness per BS6755 / ISO 5208 leak rate A
Customer-specific combination of valves and instruments (hook-up) on request
Mounting accessories
The optimal mounting accessories for your WIKA pressure measuring instruments
Adapters are, together with seals, used for the mounting of pressure measuring instruments, stopcocks, shut-off valves, syphons, snubbers and other accessory components. Protective caps protect the pressure gauges from shocks, impacts, corrosion and weathering effects. Instrument mounting brackets serve for the wall or pipe mounting of pressure measuring instruments.
Model 910.61
The WIKA process adapter system has been specifically developed to meet the requirements of the food, beverage and pharmaceutical industries. The adapter system consists of the measuring instrument with G1 hygenic connection and matching process adapter. The flexible, modular system allows connection to a wide range of aseptic process connections (e.g. clamp, threaded, VARIVENT® or NEUMO®). All parts are made of 1.4435 (316L); UNS S31603 stainless steel. The O-ring for sealing the process (optional) is supplied with a 3.1 material certificate per EN 10204. It is available in either EPDM or FKM and is listed as FDA, USP Class VI, as well as 3-A 18-03.
Applications
Food, beverage and pharmaceutical industry
Cosmetics industry
Special Features
Large selection of different process adapters for connection to the G1 hygienic connection
Measuring instrument and process adapters can be combined by the user
Model 910.60
The pharmaceutical grade BioControl® System is used to adapt pressure and temperature measuring instruments to pipelines and vessels. It has been specifically developed for applications in sterile process engineering. For the sophisticated requirements within the sterile process industries, various different designs of the BioControl® system are available, with type-test approval.
Applications of the block-and-bleed valve
Shut off and vent pressure measuring instruments
For gaseous and liquid aggressive media that are not highly viscous or crystallising, also in aggressive environments
Process industry: Oil & gas, petrochemical, chemical industries, power generation, water and wastewater
Special features of the block-and-bleed valve
Low-wear design due to non-rotating spindle tip in the bonnet
Low torque and smooth operation of valve handle even at high pressure
Enhanced safety due to blow-out proof bonnet design
Valve seat tested for leak tightness per BS6755 / ISO 5208 leak rate A
Customer-specific combination of valves and instruments (hook-up) on request
Electrical accessories
Electrical accessories for your WIKA pressure measuring instruments
For on-site display of pressure values, pressure sensors can be combined with attachable indicators, for the central pressure indication there are digital indicators for panel mounting available. Our electrical accessories also include power supply and control units, intrinsically safe repeater power supplies and also pre-assembled connectors with cables.
Model NETRIS3
The model NETRIS®3 IIoT-capable WIKA radio unit is used wherever centralised, web-based, remote monitoring of measuring instrument data is required.
The Ex radio unit already receives the data digitally from a WIKA measuring instrument via the intrinsically safe interface. The fully encapsulated instrument with IP65 ingress protection transmits the received data continuously to a cloud via configurable data packets with LoRaWAN®.
Applications
Data transmission from measuring instruments for preventive maintenance and also monitoring of machinery for big-data analysis in a cloud
Process industry: Oil and gas, chemical and petrochemical industries, water and wastewater and power generation
For use in hazardous areas
Special features
IIoT-capable with LoRaWAN® transmission
Battery-operated LoRa® radio transmission based on LPWAN technology
High transmission range for the measured values (up to 10 km) with long battery life (up to 10 years)
Exchange of the radio unit possible in ATEX zones
Model 905
Contact protection relays are used in type 821 contact devices. They increase the switching reliability and switching capacity of electromechanical contact devices and lower their contact voltage. Undesired switching operations of contact devices caused by vibrations are significantly reduced by a drop-out delay of 0.5 sec. On the side of the contact they operate with a lower control voltage, however, on the output side they can be highly loaded. Contact protection relays consist of a power supply unit, control unit, switching amplifier and relay output. The contacts are supplied by a control unit with 35 to 40 V clocked DC (i.e. only every hundredth switching occurs under voltage). This enables the optimum contact protection and switching reliability for millions of switching cycles.
Applications
Amplification of switching current
Increasing the lifetime
Special Features
905.12 for 1 contact, output: 1 x SPDT
905.13 for 2 contacts, output: 2 x SPDT
905.14 for 2 contacts, output: 1 x SPDT intermittent, e.g. for pump control
Power supply 230Vac – 45.. 60Hz – 2,5VA
Electrical rating: 250Vac/8A/1840VA (min. 24Vdc/0,1A)
Drop out delay: 500ms
Auxiliary output: 24Vdc – 20mA
Ambient temperature 0.. +70°C
Ingressprotection IP 40 (terminals IP 20)
Hat rail mounting
Engineered solutions – pressure
Your requirement – our solution
We see ourselves not only as a provider of top quality measurement technology, but also as a highly competent partner that is able to create individually designed solutions together with you. On the basis of your specific applications, in close cooperation with you, we are ready to develop products that are tailor-made for you.
Your benefits
Customer-specific pressure measurement solutions for your competitive advantage
Short lead times and low costs
Worldwide contacts through subsidiaries and distribution partners
First-class quality and world-renowned expertise
Many years of experience in pressure measurement technology and high-volume production
Security of delivery through high production capacities
High innovation potential through qualified development engineers
Realisation of your individual solution
Design your ideal pressure measuring instrument with us – whether mechanical, mechatronic or electronic – WIKA offers an extensive selection. Naturally we also combine this, depending on the requirement, with the appropriate accessories (hook-up) or with a diaphragm seal for the most difficult of measuring tasks. This incorporates our experience from numerous implemented projects, through which we have proven solutions and components that we can draw on. As required, we will adapt our systems to your individual application or develop new ones.